|
Products from
FMXRampDesigns.Com
The CR 9.1 FMX Ramp Design

"The CR 9.1 has a
constant radius of 9.1 meters with a smooth transition up to
a lip height of 2.6 meters. This ramp is designed for any
gap up to roughly 90 feet, provides enough grip to allow a
rider to jump it even in wet conditions. This ramp is best
suited for 75 foot gaps however and is based on ramps that
are used in Freestyle contests and shows all around the
world. It is a very smooth ramp, offering loads of airtime
and a very predictable trajectory. Contact me for the
design drawings and step by step construction plans or any
other info regarding the CR 9.1. "
The Photo below shows the CR 9.1 Ramp in action.

The FMX Downramp (Ramp Designs and Ramp Plans)

"The FMX
Downramp exceeds most Freestyle Authority Specifications
from all over the globe. This landing will offer you a good
safety or crash zone, ample width and knuckle length, with a
large sweet spot that will alow you to push your trick
extensions even further, with loads of confidence. If
constructed as per my design, you will be able to use this
landing for gaps up to 100ft safely. Beyond that and you
will need to alter the landing design quite a bit. Contact
me for the FMX Downramp design and construction notes and
clear gaps safely and on a setup that is similar to what
professionals use. "
Below
is a photo of the FMX Downramp in action.

|